關鍵詞：A6006,TPSIV,熱塑彈性體
產品說明 / TECHNICAL DATA SHEET
MULTIFLEX® TEA A6002 3AZ0 NAT

Compatibility / 結合材料: PA6/PA6+GF/PA6.6/PA6.6+GF

Process / 加工: Injection/Extrusion, 注塑/擠塑
Other information/其它信息: EN71-3 met/符合EN71-3標準；FDA met/符合FDA標準

The MDA (Méthode D’Analyse) named in this document are issued from the ISO Standards.
表中所提及的 MDA (Méthode D’Analyse) 是由 ISO 頒布的標準。 The values mentioned in this Technical Data Sheet are issued from test bars realized on specific equipment, in conformity with normalized standards. Although we estimate that these information are exact, it is important to know that under other conditions with another equipment than our, the results can be appreciably different.
Therefore we are not responsible when those information are not interpreted as they should be.
產品規格中所列的各項數據是由特別的儀器遵照標準化測試所得到的。 盡管我們認為這些信息是準確的， 但是如果在其它的情況下由其它的儀器所測得的數據可能有所不同， 所以， 客戶應該自行確認產品可否被采用。   

Dow Corning Corporation 產品加工指南(注塑) / PRODUCT MOLDING GUIDE
MULTIFLEX® TEA A6002 3AZ0 NAT

Temperature Profile / 加工溫度:

* All temperature at +/-10 °C, 所有加工溫度可以在正負10攝氏度之間調節   

Predrying advice / 干燥建議 :

   
Injection speed / 注塑速度 :
Slow to Middle / 慢 至 中速  
Injection and back pressure / 注塑壓力和背壓 :

Cooling time / 冷卻時間 :
8-20 second / 8-20 秒   

Coloring Masterbatch/Pigment Powder selection / 色母粒/色粉選擇建議 :
We recommend using pigment powder, however EVA based coloring masterbatch is also acceptable. Please avoid using PE or PP based coloring masterbatch.
我們建議在該材料的配色過程中使用色粉，或者使用以EVA為載體的色母粒。請在配色過程中盡量避免使用PE或PP為載體的色母粒，以免影響材料和工程塑料之間的粘合能力。